The Usa Centrifugal Spray Dryer for Drying Polymer

The Usa Centrifugal Spray Dryer for Drying Polymer APM-USA
The Usa Centrifugal Spray Dryer for Drying Polymer APM-USA The Usa Centrifugal Spray Dryer for Drying Polymer APM-USA The Usa Centrifugal Spray Dryer for Drying Polymer APM-USA The Usa Centrifugal Spray Dryer for Drying Polymer APM-USA The Usa Centrifugal Spray Dryer for Drying Polymer APM-USA

APM-USA

$22,000.00 
SKU: P3095S

Product Description 
LPG Series High Speed Centrifugal Spray Dryer is the technology most widely used in the liquid technology shaping and in the drying industry. The drying technology is most suitable for producing solid powder or particle products from liquid materials, such as solution , emulsion, suspension and pump able paste states, For this reason, when the particle size and distribution of the final products, residual water contents, mass density and the particle shape must meet the precise standard, spray drying is one of the most desired technologies.
Technical parameters
Model
5
25
50
100
150
200
500
1000
2000-6000
Inlet temperature(?)

Technical parameters
Outlet temperature( ?)

80-90
Spraying method
High-speed centrifugal atomizer (Mechanical transmission or step less variable frequency speed regulating)
Moisture evaporating ability(kg/h)

5

25

50

100

150

200

500

1000

2000-6000
Rotary speed(rpm)
25000
22000
21500
18000
16000
12000-13000



It is decided by the process, the site condition and the user's requirement. 
Body diameter(m)
1.2
1.9
2.2
2.56
2.96
3.36
5.2
7.6
Diameter of the atomizing disc
60
120
150
180-210
Transmission power(kw)
4.2
14
18
28
37
43
76
109
Heating power(kw)
9
36
48
72
84
96
144
Recovered dry power(%)
>95

Nozzle's lifting height(m)

--

2.5

3.2
It is decided by the process.

All data are used for reference only. According to the condition of material, there will be no further notification if any modification. 

Working Process soy milk dryer.

After been filtered and heated the Air enters into the air distributor on the top of the dryer .The Hot Air enters into the drying room in the spiral form and uniformly. Passing through the high-speed centrifugal Sprayer/Atomizer on the top of the tower, the material liquid will rotate and be sprayed into the extremely fine mist liquid beads .Through the very short time of contacting the heat air, the materials can be dried into the Final products .The final products will be Discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower.